01Blackout starts at the edges.
A frame borders the fabric on all four sides, helping manage the perimeter where light can enter. A close, correct fit is essential.
PRODUCT VISUALISATION
CUSTOM BLACKOUT / TWO INSTALLATION DIRECTIONSCustom Blackout
Custom Blackout
Honeycomb Blind
Made to your window dimensions, with black blackout honeycomb fabric and a black four-sided frame. Choose horizontal or vertical installation. The images below show horizontal installation.
Four-sided blackout frameNo-drill installationHorizontal or vertical installationMade to your measurements
Check the measuring guide ↗◒ Blackout fabric▧ Four-sided frame↔ Side-to-side control⌑ Made to measure
LIGHT, ON YOUR TERMSSee the blind
See the blind
open and closed.
Keep the view when you want it.
Close the blind when it is time to switch off.
Drag the blind ↔
Fully open
Drag the handle to open or close the blind. AI room and lighting visualisation, not a measured blackout test. Actual results depend on fit and other light sources.
ONE SIMPLE, SIDEWAYS MOVEMENTA NATURAL PART OF YOUR DAYSlide across.
Slide across.
Keep the full-height coverage.
Take hold of the vertical rail and move it across the window. The pleated fabric opens and closes sideways, staying at full height as it moves.
01
Grip the rail
Use the solid moving edge, rather than pulling the fabric.
02
Choose your light
Leave it partially open for daylight, or slide it across to close.
03
Open it back up
The fabric gathers to the left, ready for the next part of your day.
THE DIFFERENCE IS IN THE DETAILS
How the frame and fabric work together.
01
02Honeycomb fabric that folds sideways.
Black blackout honeycomb fabric brings depth and texture to the window. Its cellular profile folds into a compact stack as the blind opens.
CHECK YOUR WINDOW BEFORE ORDERING
Will this blind fit?
A rectangular opening is the starting point. Check these three details before choosing your final size.
Check that the inside recess has a continuous, suitable surface for the mounting kit. Note any damaged or uneven areas.
Record the available recess depth and the clearance around handles, vents and inward-opening window sections.
Both opening styles require height to be no more than 1.5 times width. An arched, irregular or taller opening needs a separate configuration review.
Keep a front-facing window photo and your depth measurement ready for review. Minimum mounting depth and kit suitability must be confirmed for your window.
MADE TO MEASURE, STARTING HEREMeasure your recess
Measure your recess
in six places.
For an inside-recess fit, measure the opening where the frame will sit. Check the whole window, including handles and anything that could interrupt the blind’s movement.
W
Record three widths
Measure inside the recess at the top, middle and bottom.
H
Record three heights
Measure at the left, centre and right of the recess.
D
Check depth and clearance
Note handles, vents, uneven edges and inward-opening sections.
Keep all readings and a clear window photo. Confirm the final manufacturing dimensions and any deductions before ordering.
Add my window measurements ↗
Diagram is illustrative; check the fitting requirements for your window.
A CAREFUL START. A CLEAN FINISH.Prepare the recess.
Prepare the recess.
Fit without drilling.
The no-drill design keeps the installation focused on the window recess. Your fitting kit and window surface determine the exact steps.
- Check the fit. Compare the supplied frame with your confirmed dimensions before fixing anything in place.
- Prepare the surface. Make sure the fitting area is clean, dry and suitable for the supplied kit.
- Fit and check. Follow the supplied installation instructions, then check frame alignment and the full travel of the moving rail.
AT A GLANCE
Simple by design.
The configuration pictured on this page.
- Style
- Framed honeycomb blackout blind
- Operation
- Manual, horizontal sliding
- Opening shown
- Single panel · stacks on the left
- Fabric
- Opaque, vertically pleated cellular fabric
- Finish shown
- Black frame & black blackout fabric
- Sizing
- Made to measure, subject to fit confirmation
- Power
- No electrical supply required
A FEW THINGS YOU MIGHT BE WONDERINGGood questions.
Good questions.
Clear answers.
How long will my order take?
Production takes 4–5 business days. After dispatch, estimated transit time to the United States is 7–8 business days. Shipping to the United States is included in the price.
Can I cancel my order?
Each blind is custom-made to your dimensions. Cancellations are not accepted once production begins. Please check your dimensions and window compatibility carefully before ordering.
How do the two opening styles work?
The same blind can be installed horizontally or vertically. Horizontal installation slides side to side. Vertical installation pulls down to close; reverse installation closes upward. Both styles have the same prices and size limits. The images show horizontal installation.
Will it make my whole room completely dark?
The opaque fabric and surrounding frame are designed for blackout at the window. Overall room darkness also depends on accurate fit and light entering through doors, other windows or gaps elsewhere. The room images here illustrate the intended setting, rather than a measured performance result.
Will it fit my window?
Fit depends on the opening, recess depth, mounting surface and clearance around handles or inward-opening windows. Take the measurements shown in the guide and keep a window photo for a compatibility check before ordering.
Can I leave it partly open?
Yes. Move the vertical rail sideways to expose the part of the window you want to leave open. Avoid pulling or stretching the fabric directly.
Do I need to drill into the window?
This is a no-drill design. Check that your window surface is suitable for the supplied mounting kit, and follow its preparation and fitting instructions. Removal and surface effects depend on the mounting method and the surface condition.
How do I get the right price and size?
Enter your confirmed width and height above for a USD price with US shipping included. Check your measurements and window compatibility, then add your blind to the cart. Your entered dimensions are kept unchanged.
YOUR NEXT STEP
Configure my blind ↗Make it fit your window.
Enter your confirmed dimensions for a price. Shipping to the United States is included.
Room, product and detail imagery are AI visualisations.